Product Description

Q.D SA is styrene modified Quick Drying Alkyd Enamel that is designed for use ferrous Metal.

Recommended Uses

- Ferrous Metal

- A wide range of color

Features

- Good Application property

- Good Adhesion

- Good gloss and Color Retention

- Good water and wether Resistance

Physical properties

Application procedures

- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant

- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%

- Application Equipment : Brush, Spray, Roller

- Thinner : Use the recommended Exempt Enamel thinner.

- Thinning ratio : Brush and Roller 10~20%, Spray 50% (by volume)

Application information

- Do not apply above 85% R.H. and below 5℃.

- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.

- Do not mix with other paint.

- Remove dust, oil, grease and any other contaminant.

- Stir thoroughly before using.

- Use the recommended thinner.

- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.

- Wear suitable protective Equipment During Application.