Product Description

DPAU 1000 is Two component Aliphatic Polyurethane Coatings.

It is Designed For High Performance Protection with Outstanding Exterior Gloss and Color Retention.

Recommended Uses

- Heavy Duty Structured Coatings

- Chemical Equipment and Machinery Finish

- Exterior Surfaces of Steel Tanks, Hand Rail, Offshore Structure, Commercial Vehicle

Features

- Chemical Resistance

- Good Adhesion To Primer

- Outstanding Color and Gloss Retention

- Excellent Corrosion and Weathering Resistance

Physical properties

Application procedures

- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant

- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%

- Application Equipment : Brush, Spray, Roller

- Mixing ratio : Component A (Base) : Component B (Hardener) = 3 : 1 (by volume)

- The Recommended DFT : 40μm.

6. Application information

- Do not apply above 85% R.H. and below 5℃.

- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.

- Do not mix with other paint.

- Remove dust, oil, grease and any other contaminant.

- Stir thoroughly before using.

- Use the recommended thinner.

- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.

- Wear suitable protective Equipment During Application.

- The moisture contents in substrate should not exceed 6%(by wt).

- Do not contact moisture water snow and dew.

- Use the mixed paint within pot life.