Product Description

Q.D DS Anticorrosive Primer is Acrylic Resin and Red Iron oxide Based, Fast Drying primer that is Designed for use on metal surfaces to protect against corrosion

Recommended Uses

- Primer for Steel

Features

- Good AntiCorrosion

- Good Adhesion

- Fast Drying

- Good water and Salt water Resistance

Physical properties

Application procedures

- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant

- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%

- Application Equipment : Brush, Air Spray, Roller

- Thinner : Use the recommended Quick Drying thinner

- Recommended Top Coat : Air drying Enamel, Ready mixed paint, Quick Drying Enamel Finish

- Recoating time : min. 2 hours

Application information

- Do not apply above 85% R.H. and below 5℃.

- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.

- Do not mix with other paint.

- Remove dust, oil, grease and any other contaminant.

- Stir thoroughly before using.

- Use the recommended thinner.

- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.

- Wear suitable protective Equipment During Application.