Product Description

Anti Corrosive Primer is Alkyd Resin and Red Iron oxide Based, primer fast is designed for use on metal surfaces to protect Against corrosive

Recommended Uses

- Primer for Steel

Features

- Good AntiCorrosion

- Good Adhesion

- Good Recoating Properties

- Good water Resistance

Physical properties

Application procedures

- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant

- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%

- Application Equipment : Brush, Air Spray, Roller

- Thinner : Use the recommended KSM-6060 Class1, Class2 thinner

- Recommended Top Coat : Air drying Enamel, Styrene modified Enamel

- Recoat Filme : Within 8 hours, Beyond 1 day

Application information

- Do not apply above 85% R.H. and below 5℃.

- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.

- Do not mix with other paint.

- Remove dust, oil, grease and any other contaminant.

- Stir thoroughly before using.

- Use the recommended thinner.

- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.

- Wear suitable protective Equipment During Application.