Product Description

Aqiarus Primer is water soluble Acrylic Resin and Red Iron Oxide Based, Fast Drying water thinnable primer that is designed for use on steel pipes to protect Against corrosion

Recommended Uses

- Primer for Steel pipes, H-Beam and Formworks

Features

- Water Thinnable

- Environmental Friendly

- Good Adhesion and AntiCorrosion

- Good water and Alkali Resistance

Physical properties

Application procedures

- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant

- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%

- Application Equipment : Air Spray

- Thinner : water

- Thinner Ratio : 50 ~ 80%

- PMT : 80 ~ 90 ℃

- Recommended Top Coat : Air drying Acrylic or Air drying Alkyd Enamel

Application information

- Do not apply above 85% R.H. and below 5℃.

- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.

- Do not mix with other paint.

- Remove dust, oil, grease and any other contaminant.

- Stir thoroughly before using.

- Use the recommended thinner.

- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.

- Wear suitable protective Equipment During Application.