Product Description

DPAU 100 is Alkyd / Urethane Resin Based, Fast Drying Top Coat That is Designed for use on Metal and Aluminum substrate to display good flow and levelling

Recommended Uses

- Top Coat for Furniture, Door, Veneer

- Top Coat for Steel

- Designed for Interior use

Features

- Fast Drying

- High Gloss and Hardness

- Good scratch Resistance

- Excellent Adhesion and Water Resistance

Physical properties

Application procedures

- Surface preparation : Remove dust, oil, grease, moisture and any other contaminant

- Application condition : surface temperature must be at least 3℃ above dew point to prevent condensation and relative humidity must be below 85%

- Application Equipment : Brush, Spray, Roller

- Mixing ratio : Component A (Base) : Component B (Hardener) = 3.5 : 1 (by volume) For Gloss

Component A (Base) : Component B (Hardener) = 4 : 1 (by volume) For Semi Gloss, Flat

- Recoating time (20℃) : min. 60 hours

6. Application information

- Do not apply above 85% R.H. and below 5℃.

- Optimum application Temperature is suitable for 5 ~ 40 ℃ and surface Temperature must be at least 3℃ above dew point to prevent condensation.

- Do not mix with other paint.

- Remove dust, oil, grease and any other contaminant.

- Stir thoroughly before using.

- Use the recommended thinner.

- Apply the Recommended coverage to achieve optimum performance and do not apply above the Recommended coverage per coat.

- Wear suitable protective Equipment During Application.

- The moisture contents in substrate should not exceed 6%(by wt).

- Do not contact moisture water snow and dew.

- Use the mixed paint within pot life.